How to Replace a Kia Sportage Replacement Key
The key of many Kia models has the keyless entry feature built into. The key functions like an remote control and can be exchanged with an Kia dealer.
Key fobs can stop working due to a variety of reasons, including an inactive battery, worn out buttons signals, signal interference or water damage. Here are some suggestions to assist you in getting your Kia key fob that is a replacement for the sportage for good.
How do you replace the remote key or smartkey
If your Kia is equipped with an intelligent key, remote key push-to-start key, or a standard non-transponder key made of metal The battery inside these keys will eventually need replacing. This is particularly the case if your car displays a message indicating that the remote or smart keys are in poor condition.
Luckily, it's quite simple to do. In order to replace the battery on the key fob take out the mechanical key from the slit on the back of the key fob. Next, break the cover. A small screw is in the key fob to hold the battery in the correct position. Utilizing a small screwdriver unscrew the screw and pull out the old battery. Then, insert the new and close the hole in the key fob.
Test the key fob by pressing the lock or unlock buttons. It's okay when the doors lock or unlock as you expect. You can now take advantage of the hands-free lock/unlock feature on your Kia whenever your fingers feel cold or you need to go on errands around Brandon.
Note: Some key fobs (transponder chip or smart keys) may need to have their programming done. replacing kia key fob requires a machine for programming that is only available to the automotive locksmith or dealer. Other keys (non transponder metal keys) are not required for programming. If you're looking to reprogramme your key, it is necessary to record the key code number on the key code tag.
How do you replace the battery?
If the Kia key fob is unable to respond to pressing the lock/unlock button, it's a sign that the battery is low. A low battery may also cause other issues, such as the check engine light coming on or a delay in cranking the engine. Fortunately, replacing the battery on the key fob is a relatively easy DIY project that requires just some basic tools.
Make sure that you shut off your vehicle and shut all doors before you begin. Find the small metal or plastic piece on the bottom of your key fob, and move it until a metal key pops out. The key can be put into the door's driver handle to unlock your car.
To replace the battery on the key fob, you must remove the cover that covers the rear. Use a plastic pry tool to remove the latch that holds the black negative cable. Remove the old battery and align the new battery in a way that the "+" positive side faces your face and the "negative" negative side is facing the fob's electronic contacts. Push the new CR2032 battery straight into place with care to avoid using too much force to avoid damaging or bending the contacts of the metal.
Once the new battery is installed and the key fob is turned on, turn it off and back on in the ignition for a few times until the door locks cycle. You can then test your Kia's keys fob once more to ensure it is working correctly.
How can you replace the smart key
Depending on the model of the Kia Sportage, you may have a standard key fob or a smart key. The smart key features an embedded mechanical key blade while the standard key fob does not. Both key fobs have an internal battery that will eventually require changing. Fortunately, this is an easy process that will take about two minutes.
Make sure to shut off your Kia and be on a flat or well-lit surface prior to when you begin. Also, keep in mind that there are small parts inside the fob that can fall out if you are not cautious.
The first step is to find the small release button that is located on the backside of the fob. It will be either a circular silver button or a rectangular slot. You can open the key fob by pressing the button.
Once the key fob is open, remove the old battery. The new battery is a CR-2032 that can be purchased online or at a local auto parts store. Once you're done, your key fob will allow you to lock or unlock and start your vehicle, even if it isn't running.
How do I replace a mechanical key
The Kia keyfob is a wonderful convenience, allowing us to lock or unlock our car simply by pressing the button. Like any device, the Kia key fob may have issues. There are ways to fix these problems and keep your key fobs running for an extended period of time.
One of the most frequently encountered problems is a dead or dead battery. The fob could be able to stop working altogether or stop working at times. If this happens try replacing the battery with a fresh new one.
If this does not solve the problem, use the flathead screwdriver that is standard to wedge the plastic casing of the fob open. Be careful not to scratch any internal components or scratch the plastic. Once the battery is opened, carefully remove the battery that was removed and replace it with a brand new one.
Close and open the door with the mechanical key. (Every Kia fob comes with a spare mechanical key which will fit into the slot). Test the key fob to verify that it's functioning properly. If the fob isn't functioning, contact a dealer or locksmith to help resolve the issue. To avoid lockouts in the future, ensure that you have an emergency key that can work in all of the door and trunk cylinders.